MPI media airjetmarginhome Gravure Japanese_Newspaper_OEM_Engine Lotem_400_Fiber_Head_Machine Lotem_800_Fiber_Head_Machine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 AirjetMarginHome specifies the minimum distance the head must be away from the home media edge before the debris airjet will be allowed to turn on. If the airjet is on when the head is too close to a media edge, imaging quality may be compromised near that edge. This media specific parameter (and AirjetMarginAway) is used to eliminate these potential artifacts by ensuring that the airjet is off when the head is near the media edges. This parameter is available.

0 [microns]

Please issue the appropriate monitor command to determine this parameter's minimum and maximum values.

02-Apr-2003 Currently, the airjet magin is forced to off (0 um) when UDRC-L is enabled. Normal

..\..\ShowAllErrors.htmFirmware 1 Error Index

..\..\ShowAllCommands.htmFirmware 1 Command Index

..\..\ShowAllParameters.htmFirmware 1 Parameter Index

Updated: Thu Jul 17 07:24:05 2008 PST